wincc7.0 sp1無法移植6.0的項目過來，提示：（移植已完成。移植中發生錯誤。祥細報表可在文件XXX中找到）。*********************************************************************
PROJECT NAME: F:\mqczq20130117\mqczq\wincproj\OS(1)\OS(1).mcp

PROJECT TYPE: multiuser

MIGRATION OBJECTS:
pictures and libraries

START TIME:    2013-09-16 16:51:39

ERROR: Error while opening WinCC project. hr=0x80046105 --> CS AlarmLogging could not be updated.
ERROR: Error while closing WinCC project.
FINISH TIME:   2013-09-16 16:51:56

Migration finished with errors.
*********************************************************************
*********************************************************************
PROJECT NAME: F:\mqczq20130117\mqczq\wincproj\OS(1)\OS(1).mcp

PROJECT TYPE: multiuser

MIGRATION OBJECTS:
pictures and libraries

START TIME:    2013-09-22 15:54:21

ERROR: Error while opening WinCC project. hr=0x80046105 --> CS AlarmLogging could not be updated.
ERROR: Error while closing WinCC project.
FINISH TIME:   2013-09-22 15:54:40

Migration finished with errors.
*********************************************************************
*********************************************************************
PROJECT NAME: F:\mqczq20130117\mqczq\wincproj\OS(1)\OS(1).mcp

PROJECT TYPE: multiuser

MIGRATION OBJECTS:
pictures and libraries

START TIME:    2013-09-23 10:33:37

ERROR: Error while opening WinCC project. hr=0x80046105 --> CS AlarmLogging could not be updated.
ERROR: Error while closing WinCC project.
FINISH TIME:   2013-09-23 10:33:58

Migration finished with errors.
*********************************************************************
也不能建新的項目？？？？提示：cannot open/create wincc project - project manager can't start basis application XREF

重裝系統吧。

試了取消共享，還是不行�？磥硎且�重裝系統了。
還有別的辦法嗎，不想重裝系統。