維綸宏指令
我是想把整批的位狀態(tài)傳送到PLC中
的是這樣做的，但是不怎么理想
M500-510的都能傳過去，后面的就不行了，麻煩您給指點下


macro_command main()
bool f=0
bool a,b[40]

GetData(a, "DELTA DVP", M, 1000, 1)
SetData(a, "Local HMI", LB, 101, 1)

GetData(b[0], "Local HMI", RW_Bit, 500, 40)
SetData(b[0], "DELTA DVP", M, 500, 40)


SetData(f, "Local HMI", LB, 101, 1)        
          
                                                
                                                                                
end macro_command