機器人取放產品，定位。以及加工（趕毛邊打磨）

想試下碼垛，但看說明書不太了解，


ALLCLR    
*QUYU    
GETP V101!    
IF V102!>V170! THEN *A ELSE *B    
*A    
V103! = V171!    
P555 = (V101!,V102!,V103!,V104!,V105!,V106!)    
MOVEX A=8,AC=0,SM=0,M1X,L,P555,S= 600.0,H=1,MS    
MOVEX A=1,AC=0,SM=0,M1X,L,(276.041,264.139,594.578,3.078,-2.797,-178.853),R= 100,H=1,MS, CONF=0000    'Yguodu
GOTO *C    
*B    
V103! = V103!+100    
P555 = (V101!,V102!,V103!,V104!,V105!,V106!)    
MOVEX A=8,AC=0,SM=0,M1X,L,P555,S= 600.0,H=1,MS    
*C    
MOVEX A=1,AC=0,SM=0,M1X,P,(225.023,0.633,594.503,3.078,-2.795,-178.865),R=50.0,H=1,MS, CONF=0010    'P88原點
SETM O2,1    '機器人準備完成
*DAIJI    
IF I10=1 THEN *QULIAO    '����
GOTO *DAIJI    
END    
*QULIAO    
SETM O10,1    '不允許下
DELAY 0.2    
IF I08=1 THEN *ZHIJIEFAN    '直接放料
MOVEX A=1,AC=0,SM=0,M1X,L,(276.033,264.124,594.534,3.079,-2.797,-178.859),R=90.0,H=1,MS, CONF=0000    'P90過渡
*QUYI