這幾天一直在郁悶，昨天還能和300plc連的上，今天就提示這個（在線：驅動程序組態錯誤或注冊表無效），對了還有個問題，在設置PG/PC接口設為PC adapter（Auto）后連PLC就出現藍屏？請教下高手該怎么解決？謝謝！
藍屏如下：藍屏如下：check to make sure any new hardware or software is properly installed,if this a new installation,ask you hardware of software manufacturer for any windows updates you might need

if problems continue ,disable or remove any newly installed hardware or software ,disable bios memory options such caching or shadowing,if you need to use safe mode to remove or disable components,restart your computer,press F8 to select advanced options,and the select safe mode



technical information：

***stop ：0x00000019 (0x00000020,0x84c1d230,0x84c1d258,0x1a050008)
我都重裝了一次系統了，還是出這個問題，望指導一下！謝謝

我感覺是硬件上驅動的問題
驅動與系統文件發生沖突
先把驅動卸掉
再另找一個裝上試試