CX-ONE V4.0 新品上市

http://rapidshare.com/files/368986234/CXONEV4.part01.rar
http://rapidshare.com/files/368995621/CXONEV4.part02.rar
http://rapidshare.com/files/369002571/CXONEV4.part03.rar
http://rapidshare.com/files/369008084/CXONEV4.part04.rar
http://rapidshare.com/files/369013503/CXONEV4.part05.rar
http://rapidshare.com/files/369020353/CXONEV4.part06.rar
http://rapidshare.com/files/369025883/CXONEV4.part07.rar
http://rapidshare.com/files/369031513/CXONEV4.part08.rar
http://rapidshare.com/files/369037294/CXONEV4.part09.rar
http://rapidshare.com/files/369042899/CXONEV4.part10.rar
http://rapidshare.com/files/369048907/CXONEV4.part11.rar
http://rapidshare.com/files/369055031/CXONEV4.part12.rar
http://rapidshare.com/files/369061729/CXONEV4.part13.rar
http://rapidshare.com/files/369068776/CXONEV4.part14.rar
http://rapidshare.com/files/369243683/CXONEV4.part15.rar
http://rapidshare.com/files/368972741/CXONEV4.part16.rar

產品序列號 sn:1600-0201-1248-5301



下載方法:
1.用專用工具RapidShare Plus v3.1 漢化綠色版下載(81k).
2.把以上16個地址復制全部添加到RapidShare Plus v3.1里面后(如最上面圖片,我已下了5個),點下載就OK,非常簡單. 自動全部下載.
3.rapidshare的東西下載時很考驗?zāi)�的耐心的，F(xiàn)ree用戶要在15分鐘之后才能再次下載，中間斷網等原因就保存一個不對的包，得多試驗幾次。但最終肯定能下載下來的。16個包都在90M以上(最后一個80M),哪個包不對重新下載哪個.下載完后解壓縮得到一個1.99G的壓縮包,如果不是肯定不對.
4.安裝時對C盤要求最低空間3.0G,安裝方法請參照3.0的,最好是沒裝過歐姆龍軟件的系統.
5.希望安裝成功的朋友多交流一下經驗.

◆PLC統合編輯軟體：CX-One Ver4.0 (C**：CXONE-AL□□C-V4/ DV**：CXONE-AL□□D-V4)內含軟體：
．CX-Programmer Ver9.03
．CX-Integrator Ver2.4
．CX-Designer Ver3.0
．NV-Designer Ver1.1
．CX-Protocol Ver1.9
．CX-Simulator Ver1.9
．CX-Position Ver2.5
．CX-Motion-NCF Ver1.9
．CX-Motion-MCH Ver2.2
．CX-Motion Ver2.3
．CX-Drive Ver1.9
．CX-Process Tool Ver5.2
．CX-Configurator FDT Ver1.2
．Network Configurator Ver3.1
．Faceplate Auto-Builder for NS Ver3.1
．CX-Thermo Ver4.2
．CX-FLnet Ver1.0
．SwitchBox Utility Ver1.6
．CX-Server Ver4.3
．PLC Tools

還可以，開始支持指令直接輸入，謝謝樓主